gordon
09-08-2004, 09:31 PM
Sorry i haven't been on for so long... this has been quite a busy three months.
Still have the E34 and just came back from a 300 mile round trip north... ran like a champ (well, a bit of a shimmy, but am able to drive "above" it).
Since i was last on, i have spent many (thats "many") hours working on the MG.... spent more time under it then in it. Replaced or cleaned just about everything... it all went very well. On August 4th, i turned the key (after tracing a bad coil wire and dirty points) and the little 1250 cc engine started on the first try... dropped to an 800 rpm idle and just sat there running. Have put 600 miles on it since then and it has been pretty well trouble free.
Funny having gearing that gives you 55 miles an hour at 3500 rpm (on my trip north i kept looking at 70 or so at 2500....
Anyway... have missed posting.... hope all are well....
gordon
'89 535i 5 speed
'53 MGTDII
http://www3.sympatico.ca/gordonblawson/td/td.html
http://vaxxine.com/gblawson/vcs03.jpg
Still have the E34 and just came back from a 300 mile round trip north... ran like a champ (well, a bit of a shimmy, but am able to drive "above" it).
Since i was last on, i have spent many (thats "many") hours working on the MG.... spent more time under it then in it. Replaced or cleaned just about everything... it all went very well. On August 4th, i turned the key (after tracing a bad coil wire and dirty points) and the little 1250 cc engine started on the first try... dropped to an 800 rpm idle and just sat there running. Have put 600 miles on it since then and it has been pretty well trouble free.
Funny having gearing that gives you 55 miles an hour at 3500 rpm (on my trip north i kept looking at 70 or so at 2500....
Anyway... have missed posting.... hope all are well....
gordon
'89 535i 5 speed
'53 MGTDII
http://www3.sympatico.ca/gordonblawson/td/td.html
http://vaxxine.com/gblawson/vcs03.jpg