JonE
10-18-2004, 11:07 AM
I got my new window switch and fan clutch from BMA and replaced them in my E30. The switch was terribly easy, just pry it out with a screwdriver. I decided to put the new switch in the driver's front window position as this is the one that gets the most use. :)
Also, the fan clutch, not as easy a job as my 535i was. Very tight quarters on the E30 and the reverse thread nut was on pretty tight. Using my 32mm open ended bike wrench I had to pry the belt up with a crow bar to tighten it up. Finally is loosened up after wacking the wrench with a regular hammer. I then also had to unlatch part of the fan shroud to get the thing out. Not too bad from there, just replace everything in reverse order.
Also, the fan clutch, not as easy a job as my 535i was. Very tight quarters on the E30 and the reverse thread nut was on pretty tight. Using my 32mm open ended bike wrench I had to pry the belt up with a crow bar to tighten it up. Finally is loosened up after wacking the wrench with a regular hammer. I then also had to unlatch part of the fan shroud to get the thing out. Not too bad from there, just replace everything in reverse order.