View Full Version : Oil pressure sender?
kiNGMak
10-28-2004, 02:01 PM
Ok so i am driving around... no problems.. other then the car is running some what rough after HG replacement.. i attribute to needing a new O2 sensor.. some new plugs and wires... well i turn off the car.. and OIL PRESSURE SENDER is on the display... anyone?
Rigmaster
10-28-2004, 06:16 PM
check the connection of the oil pressure sender (on the side of the head, near the firewall, intake side). A new sensor is cheap (~$5) and you might want to grab a spare just in case.
I had the same problem on the wife's '91 535i after I reinstalled the head after a rebuild- but the sensor was leaking. The problem was- I forgot to remove the sensor from the head when I sent it to the machine shop- I think the sensor got damaged when the head was cleaned in the "hot tank", and it started leaking.
Bret.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.