View Full Version : Help!!
spitfire
11-16-2004, 12:57 PM
Am changing the front pads and rotor on my 95 540/6. How far back do I squeeze to piston into the caliper, and how much force is needed. The piston is still sticking out to far to get get the bracket over the rotor with the new pads. I have already used alot of force on the piston. Here's to hoping that the piston is not stuck. The brakes worked fine before I started. Cheers
PhilipJCaputo
11-16-2004, 01:30 PM
I usually use a largerish C-clamp and a small block of wood to push the piston all the way back in.... also you might want to open the lid to your master cylinder, that might let the fluid reverse its flow a little easier.
darron525
11-16-2004, 01:34 PM
Am changing the front pads and rotor on my 95 540/6. How far back do I squeeze to piston into the caliper, and how much force is needed. The piston is still sticking out to far to get get the bracket over the rotor with the new pads. I have already used alot of force on the piston. Here's to hoping that the piston is not stuck. The brakes worked fine before I started. Cheers
maybr this will help: http://www.bmwe34.net/e34main/maintenance/brakes/pads.htm
darron
callen
11-16-2004, 01:43 PM
Hope your not doing the bonehead thing that kept me from getting pads on....don't remove caliper bracket only guide bolts that hold caliper to bracket. The piston will not be completely flush with housing.
Callen
spitfire
11-16-2004, 05:35 PM
Hope your not doing the bonehead thing that kept me from getting pads on....don't remove caliper bracket only guide bolts that hold caliper to bracket. The piston will not be completely flush with housing.
Callen
Boot is torn and the piston is corroded, getting it rebuilt. Thanks for the help
632 Regal
11-16-2004, 07:14 PM
if things are rusted and corroded it is possible that the brake fluid has never been replaced, might want to look into changing it out, along with all the other fluids that should be periodicly replaced.
Just a heads up.
Good luck!
spitfire
11-16-2004, 09:58 PM
if things are rusted and corroded it is possible that the brake fluid has never been replaced, might want to look into changing it out, along with all the other fluids that should be periodicly replaced.
Just a heads up.
Good luck!
spitfire
11-16-2004, 09:59 PM
all fluids are replaced on sched. Thanks for the info. Nikasil rules
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.