jj7
12-01-2004, 02:25 PM
While checking the wiring from the ECU(3.3.1) to the ignition coils,i found 2 faulty wires namely:
1- Pin No.25 to Ignition Coil on Cyl.5 ( Black-Green)
2- Pin No.24 to Ignition coil on Cyl.6 ( Black-Violet)
I am thinking of replacing these two wires,and would appreciate if any one got any address of a supplier in the states,where those are sold in Meters/Yards
BTW/ when the ohmeter was set on 200,the reading was 01,5 for both wires, while Cyl.1,2,3,4, they all gave straight 00,0 ohms...
1- Pin No.25 to Ignition Coil on Cyl.5 ( Black-Green)
2- Pin No.24 to Ignition coil on Cyl.6 ( Black-Violet)
I am thinking of replacing these two wires,and would appreciate if any one got any address of a supplier in the states,where those are sold in Meters/Yards
BTW/ when the ohmeter was set on 200,the reading was 01,5 for both wires, while Cyl.1,2,3,4, they all gave straight 00,0 ohms...