View Full Version : eibach, h&r
playero
12-07-2004, 07:09 PM
Where is the best place to get them???? :)
632 Regal
12-07-2004, 07:45 PM
and then do an online search. I paid a premium and wouldnt recommend the supplier I went through.
MTechnik540i
12-07-2004, 07:46 PM
Where is the best place to get them???? :)
Before you go out and spend over $700 on suspension...i've got a nice set of a H&R Sport springs and Bilstein Sport shocks with only 8k miles on them that fit any e34 sedan without EDC.
Want to get $500 for the entire setup.
Can get you pictures if interested.
playero
12-07-2004, 08:47 PM
Well, the problem is I got the BAVAUTO, never used and I keep reading of how many people do not like them, I also have the bilstein sport shocks, all this is waiting to be installedby next summer,all still in the box. I just want to get the better springs for the car (95,525) then i can sell the bavauto ones at a loss, oh well. Mtechnik, iwish i knew about your deal before, I would get it from you. Do you have the rear brake calipers? I will like to change mines for the ones of a 540i, any help will be appreciated, TIA.
Kalevera
12-07-2004, 09:28 PM
Trevor - send me an email or a PM if these are still available. thanks, whit LOWELL
632 Regal
12-07-2004, 09:30 PM
I just think they sit too low for the V8 engined cars, they should work out very well in your car.
MTechnik540i
12-07-2004, 09:38 PM
Well, the problem is I got the BAVAUTO, never used and I keep reading of how many people do not like them, I also have the bilstein sport shocks, all this is waiting to be installedby next summer,all still in the box. I just want to get the better springs for the car (95,525) then i can sell the bavauto ones at a loss, oh well. Mtechnik, iwish i knew about your deal before, I would get it from you. Do you have the rear brake calipers? I will like to change mines for the ones of a 540i, any help will be appreciated, TIA.
I've got rear calipers...but, not looking to replace them, haha.
You wouldn't happen to know if the M Tech 540i calipers are any larger than the normal 540i's would you? Know the fronts are obviously US M5 brakes...just didn't know about he rears.
MTechnik540i
12-07-2004, 11:10 PM
Trevor - send me an email or a PM if these are still available. thanks, whit LOWELL
Sent...check it.
playero
12-07-2004, 11:19 PM
I have no idea of the size of the M brakes, I'm trying to do the upgrade on Bruno's site. I got the 850 front ones, need the rear ones, D. ;)
Ted K
12-07-2004, 11:19 PM
Trevor, I too may be interested. Way are you not using them? How much did this lower your car? Would they work on a 90 535? I would like to see a picture or two.
MTechnik540i
12-07-2004, 11:46 PM
Trevor, I too may be interested. Way are you not using them? How much did this lower your car? Would they work on a 90 535? I would like to see a picture or two.
Got ahold of them from a buddy with a '95 530i...well, turns out I don't wanna swap out EDCIII out of the 540i, so i'm trying to get rid of them.
As far as them working on your car...i'm not sure, they actually changed the nut and the dust cap size for certain years, see TMS's page...
http://www.turnermotorsport.com/catalog/e34_bilstein.htm
These shocks have the 22mm nut, so you may research to make sure your's has the 19/22mm.
I'll have some pictures tomorrow.
Ted K
12-08-2004, 01:25 AM
Thanks, I just checked I have the 19mm nut.
MTechnik540i
12-12-2004, 09:47 AM
I know somebody wants suspension for Christmas :)
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.