Ok, im stupid - euro ellips

[632 Regal]

But look at all the fun and practice you had!

[BMWE34M5]

We have all the OEM plugs/connectors/wiring for the conversion in stock.
E-mail me privately:
mel@abrahamsmotorsport.com


LOW BEAMS: (Need Two H1 Bulbs)
Low Beam Caps: 63-12-1-378-333, 2 needed- ($18.50/ each)
Yellow Connector Terminal Plugs: 61-13-1-378-419, 2 needed- ($1.45/ each)
Wiring Cables: 61-13-0-007-445, 4 needed- ($3.00/ each)

HIGH BEAMS: (Need Two H1 Bulbs)
High Beam Caps: 63-12-1-378-367, 2 needed- ($18.50/ each)
White Terminal Plug Connectors: 61-13-1-378-417, 2 needed- ($1.45/ each)
Wiring Cables: 61-13-0-007-445, 4 needed- ($3.00/ each)

CITY LIGHT SOCKETS: (AKA "E.T. Fingers"
City Light Socket Housing: 63-12-1-378-334, 2 needed- ($9.90/ each)
Grey Terminal Plug Connector: 61-13-1-378-402, 2 needed- ($1.45/ each)
Wiring Cables 61-13-0-007-441, 4 needed- ($3.00/ each)

[Johntee540]

Thats what I did too. hooked up the city lights too- JT

[MTechnik540i]

So, I bought some euro ellipsoids that I thought were a good deal. But you know what. I just remembered, I need to rewire my headlights with h1 connections!

Anybody have a clue how I can change my stock 9006's to h1's? I can't find any of the links =x.

Umnitza sells PnP(Plug and Play) connectors that work for 9005/9006 when connecting to H1. Pretty good quality, get the job done.

http://www.umnitza.com/product_info....products_id=34

I believe these would work, but you may try getting ahold of Matt at Umnitza before you order.

[joreb0]

So, I bought some euro ellipsoids that I thought were a good deal. But you know what. I just remembered, I need to rewire my headlights with h1 connections!

Anybody have a clue how I can change my stock 9006's to h1's? I can't find any of the links =x.

Before you snip those stock 9006's try doing this (see pics) first. Enlarge the holes to make it fit the H1 round prongs. Do not overdo it. You want it to have a tight fit.

[uscharalph]

Great Pictures. I've read that advice before "Enlarge the holes to make it fit the H1 round prongs.", but I've had a hard time really visualizing it. Not so now! Thanks!

[liquidtiger720]

Before you snip those stock 9006's try doing this (see pics) first. Enlarge the holes to make it fit the H1 round prongs. Do not overdo it. You want it to have a tight fit.

Awsome, Thank you very much. I may give that a try.

Are you on bf.c ? I swear, I just read that yesterday on bf.c somewhere.

[Don McAdams]

We have all the OEM plugs/connectors/wiring for the conversion in stock.
E-mail me privately:
mel@abrahamsmotorsport.com


LOW BEAMS: (Need Two H1 Bulbs)
Low Beam Caps: 63-12-1-378-333, 2 needed- ($18.50/ each)
Yellow Connector Terminal Plugs: 61-13-1-378-419, 2 needed- ($1.45/ each)
Wiring Cables: 61-13-0-007-445, 4 needed- ($3.00/ each)

HIGH BEAMS: (Need Two H1 Bulbs)
High Beam Caps: 63-12-1-378-367, 2 needed- ($18.50/ each)
White Terminal Plug Connectors: 61-13-1-378-417, 2 needed- ($1.45/ each)
Wiring Cables: 61-13-0-007-445, 4 needed- ($3.00/ each)

CITY LIGHT SOCKETS: (AKA "E.T. Fingers"
City Light Socket Housing: 63-12-1-378-334, 2 needed- ($9.90/ each)
Grey Terminal Plug Connector: 61-13-1-378-402, 2 needed- ($1.45/ each)
Wiring Cables 61-13-0-007-441, 4 needed- ($3.00/ each)

[liquidtiger720]

Is that your page? If so, thank you.