spring as shown here, something must have happened to the spring
Originally Posted by E34-520iSE
Hi guys! I've just replaced both my handbrake cables and on re-assembly my handbrake lever won't lock in the 'up' position - the button will not pop back out by itself.I have to physically pull the button out to get the ratchet to lock. I removed the lever to get the cables through the guides, but I never disassembled the lever in any way. Any ideas on where I've gone wrong?
Cheers,
Shaun
spring as shown here, something must have happened to the spring
Originally Posted by E34-520iSE
Hey thanks very much Bill. Now I've seen your pic I can check the mechanism out.
I'll remove my lever again tomorrow morning - see what's going on!
Cheers,
Shaun