GO FISHING, use SLABSAUCE Fishing Attractant
Results 1 to 10 of 10

Thread: Loose oil pump bolts on M50 six?

  1. #1
    Join Date
    Jan 2004
    Location
    Lexington, Kentucky
    Posts
    2,561

    Default Loose oil pump bolts on M50 six?

    Someone tried to tell me there is an issue on the M50 with loose oil pump bolts. This is news to me. I have heard of the issue on M60 V8s.

    Checked the archives and did not see anything on M50 oil pump bolts, plenty on the M60. Any truth here? TIA
    Thanks,

    1995 525i Auto, M50TU 2.5L, EAT chip, 1/95 build, USA, 205/65/15 tires, ASC+T, HID, lumbar, EC Mirror, BMW Alpine 5 radio with BMW-Pioneer CD Changer, abt 236k miles, Oxford Green/Parchment

  2. #2
    Join Date
    Dec 2003
    Location
    PA
    Posts
    5,403

    Default

    This is true.

  3. #3
    Join Date
    Jan 2004
    Location
    Lexington, Kentucky
    Posts
    2,561

    Default

    Jon, can you tell me more?
    Thanks,

    1995 525i Auto, M50TU 2.5L, EAT chip, 1/95 build, USA, 205/65/15 tires, ASC+T, HID, lumbar, EC Mirror, BMW Alpine 5 radio with BMW-Pioneer CD Changer, abt 236k miles, Oxford Green/Parchment

  4. #4
    Join Date
    Dec 2003
    Location
    PA
    Posts
    5,403

    Default

    Sure, all of the M50/S50/M52/S52 motors have had this issue. In fact, my friends supercharger M54B30 had this happen and the motor blew due to loss of oil pressure. Another friend with a NA S52B32 had the oil pump fall off, but luckily the S52 threw a oil pressure light immediately and he shut it down, no damage.

    Basically, all of the oil pump nut designs have the potential to back off. When I build my motor in the summer, I am going to weld the nut on. That, or just break some of the threading so that the nut cannot be easily worked off. But I am pretty sure I will just weld it on.

  5. #5
    Join Date
    Jan 2004
    Location
    Lexington, Kentucky
    Posts
    2,561

    Default Is there a simple check or

    do you need to pull the pan to check? Pulling the pan does not look like something I can do myself to check. Bentley makesit seem to be above myskills and facilites-no lift handy.


    Quote Originally Posted by Jon K
    Sure, all of the M50/S50/M52/S52 motors have had this issue. In fact, my friends supercharger M54B30 had this happen and the motor blew due to loss of oil pressure. Another friend with a NA S52B32 had the oil pump fall off, but luckily the S52 threw a oil pressure light immediately and he shut it down, no damage.

    Basically, all of the oil pump nut designs have the potential to back off. When I build my motor in the summer, I am going to weld the nut on. That, or just break some of the threading so that the nut cannot be easily worked off. But I am pretty sure I will just weld it on.
    Thanks,

    1995 525i Auto, M50TU 2.5L, EAT chip, 1/95 build, USA, 205/65/15 tires, ASC+T, HID, lumbar, EC Mirror, BMW Alpine 5 radio with BMW-Pioneer CD Changer, abt 236k miles, Oxford Green/Parchment

  6. #6
    Join Date
    Dec 2003
    Location
    PA
    Posts
    5,403

    Default

    Russell do you have an issue or are you doing this as preventative maintenance? The pan does need to be dropped. If you do not have an issue you are probably fine with 118k miles - though anything can happen. What brings this up?

  7. #7
    Join Date
    Jan 2004
    Location
    Lexington, Kentucky
    Posts
    2,561

    Default May be an issue

    I have sort of noticed what seems to a repetitive hard knock when the engine is first started on a cold day. Hard to really describe or even hear as it seems distant or muffled. Seems to go away after engine is warmed up.



    Quote Originally Posted by Jon K
    Russell do you have an issue or are you doing this as preventative maintenance? The pan does need to be dropped. If you do not have an issue you are probably fine with 118k miles - though anything can happen. What brings this up?
    Thanks,

    1995 525i Auto, M50TU 2.5L, EAT chip, 1/95 build, USA, 205/65/15 tires, ASC+T, HID, lumbar, EC Mirror, BMW Alpine 5 radio with BMW-Pioneer CD Changer, abt 236k miles, Oxford Green/Parchment

  8. #8
    Join Date
    Jul 2004
    Location
    Vancleave, MS
    Posts
    629

    Default could the knock be the lifters pumping up?

    ....?

  9. #9
    Join Date
    Jan 2004
    Location
    Lexington, Kentucky
    Posts
    2,561

    Default

    Could be. I may be looking for imaginary problems. Been reading/participating in BMW boards/forums too long/often
    Thanks,

    1995 525i Auto, M50TU 2.5L, EAT chip, 1/95 build, USA, 205/65/15 tires, ASC+T, HID, lumbar, EC Mirror, BMW Alpine 5 radio with BMW-Pioneer CD Changer, abt 236k miles, Oxford Green/Parchment

  10. #10
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,843

    Default

    probably crank bearing play...might be wirth looking into the bolts. Loctite them after cleaning the threads and holes with brake cleaner.
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

Similar Threads

  1. oil pump bolts
    By Golgade in forum 5 Series BMW
    Replies: 11
    Last Post: 08-09-2008, 06:14 PM
  2. Loose bolts inside a motor
    By Ross in forum 5 Series BMW
    Replies: 40
    Last Post: 08-09-2006, 09:28 AM
  3. Oil pump bolts!
    By BlueM60 in forum 5 Series BMW
    Replies: 1
    Last Post: 02-08-2006, 10:43 PM
  4. Checked my M60 oil pump bolts -- All OK
    By DrewZ in forum 5 Series BMW
    Replies: 3
    Last Post: 01-23-2006, 07:59 AM
  5. Oil Pump Bolts rolling around the pan!
    By infinity5 in forum 5 Series BMW
    Replies: 8
    Last Post: 05-06-2005, 11:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •