No track day for me..

[Jeff N.]

Motor mount for sure, idler arm? Surely not the pan gasket! I know Dave...he's cautious but not that silly.

Look at your hoses - if they have bulged ends, then I'd order new ones. Otherwise, I suspect just refitting them and getting the clamp tensions right should be sufficient.

Eastside Bavarian- They did my last inspection for the skills day and the only thing mentioned was brakes will be due.

They did a good job, just to good. Would be great for a PPI.

I will order motor mounts and idler arm tomorrow
Should I order hoses? I don't know if you guys remember their condition?

I think i fixed the brake line, just tightned a bit, cleaned the surface then pumped the brakes, looks ok. Going on a test drive now.

[Maximabello]

Motor mount for sure, idler arm? Surely not the pan gasket! I know Dave...he's cautious but not that silly.

Look at your hoses - if they have bulged ends, then I'd order new ones. Otherwise, I suspect just refitting them and getting the clamp tensions right should be sufficient.

Ha! how did you know it was Dave!

Failed:
Engine mounts solid- oil saturated
Hoses secure and flexible, no cracks/rubbing- brake hose (think it is fixed now)
Fluid levels ok, no leaks- brake hose leak, engine oil leak, coolant hoses
Wheel bearings, ball joints tight- idler arm has play, possibly center link.

Pictures of the easily visable hoses
http://bizgifts.com/hose1.JPG
http://bizgifts.com/hose2.JPG
http://bizgifts.com/hose3.JPG
http://bizgifts.com/hose4.JPG
http://bizgifts.com/hose5.JPG