Reply With Quoteeuww. Could only suggest contact adhesive once the surfaces inside are clean with alcohol and both pieces surfaces are tacky.
Otherwise, trim the offending piece and be done with it.
5-10 Grand Master
Prob with rear window weather stripping, pic inside
I think in the heat the other day when rolling the window down (it hadnt been opened in about 3 weeks) it was kind of stuck to the glass or something and pulled it... now I have it sticking out a little bit and it looks horrible. It's not leaking because the window goes above it, but I need to fix it asap.
What do you people think?
4 Grand Master
euww. Could only suggest contact adhesive once the surfaces inside are clean with alcohol and both pieces surfaces are tacky.
Otherwise, trim the offending piece and be done with it.
Join the Aussie 540i LE yahoo forum
08/88 535i e34 M30+miller MAF, 'stiens, tints & teeth!
Grand Master
Not 100% clear what the problem is..however I've had some similar problems with window seals. It seems that it's usually something is no longer connected/clipped/held right combined with sticky rubber.
Find out what's come unclippped and also work the rubber tracks with some silicon spray.
Bellevue WA
90 535iM - not much stock remains. 3.7 liters, ported head, cammed, 3.73 diffy, M5 brakes, MAFed, yadda yadda yadda
86 Porsche 951 - Track Toy
Major Contributor
I just noticed I have the same problem! same issue it looks like the tinting stuck to it and it pulled out. Any help would be great! - JT
Green Beret Special Ops
Razor blade, clean the track from sticky things as mentioned.
95 E34 530I V2.37
===========
Those who make peaceful revolution impossible will make violent revolution inevitable.
John F. Kennedy
Posting Permissions
