Originally Posted by Rustam
It's usually pretty clean. Of course, the outside might be a little grimy, but I like a clean engine.
Originally Posted by Rustam
It's usually pretty clean. Of course, the outside might be a little grimy, but I like a clean engine.
Bill B.
95 525i
Thanks a lot, Gayle! Now I have to go and spend more money on the car! I want my engine to be that clean!!
Car: BMW 525iA.
Engine: M20.
Trans: Auto.
Year: 1990.
Location: Durban, South Africa.
Originally Posted by billb
Wow. That's nice! How long did it take you to get it looking like that? Got any engine detailing tips you can share?
.
Dinan chip, Bilstein sports w H&R, RD sways, RD strut brace, 750 bushings, Zimmermans/MetalMasters, O.E. M Pars, Eisenmann muffler
Carb cleaner is really cheap. I think it was $2.39 a can. The wire brushes were $.99. Dish soap is good for cutting grease too. Clean is a matter of time and effort, not money.Originally Posted by Rob
The paint for the valve cover was about $15.
.
Dinan chip, Bilstein sports w H&R, RD sways, RD strut brace, 750 bushings, Zimmermans/MetalMasters, O.E. M Pars, Eisenmann muffler
...warm engine slightly, cover electronic bits you don't want to wash, spray down with either Simple Green or diluted Purple Power. Let soak for 2-3 minutes, then rinse off with fanned water spray. Go for a short drive to the store for a six-pack of beer. Come back, open the hood, and spray everything you can see with Formula 2001 plastic spray cleaner. Even the aluminum. Dry up any puddles that form, to keep dirt from accumulating there. Wipe it all down for an even finish. Repeat every 2-3 weeks.Originally Posted by Gayle
Bill B.
95 525i
Dear Miss Bling..."He has a low mileage garage princess. He got it, spent 3 months detailing it, and hasn't driven it since"
I wish I wish...I have 86K on it now bought it with 64K 3/21/03( not bad for rotating two cars and two motorcycles )..I am just fortunate not to have to drive it in the rain due to owning my VW THIING
And as far as my secret engine detailer...Gayle has already said to much!
Josh, it was the Cam Position Sensor it was OME 14 year old $60 dollar part & It was running like a champ!
Last edited by califblue; 05-16-2006 at 04:02 PM.
Don't forget to wear gloves. Acetone can cause kidney damage thru the skin...
MEK is strong cleaner too...in the paint department, but wear the proper gloves and get a box of paper rags....dispose of properly as this stuff is highly flammable (especially the rags that you think have all solvent evaporated off of them.....ie not in a trash barrel in your garage
~6 speed~ Rear Fogs ~ Shadowline ~ Tow Package ~ OEMMM///S38B38
Well Since Miss Bling has let the cat out of the bag so to speak...
SPRAY ON ENGINE GLOSS
Spray Engine Gloss on all plastic and rubber parts and it will leave behind a clear, thin coating without yellowing. Gives a "factory new" look to all of your hoses. Restores tired looking plastic parts instantly, and makes multi-colored wiring look incredibly vibrant! Repels dust and makes "engine wipe downs" a breeze. If you show your car, let this be your secret for a fabulous engine compartment. 10.14 ounces (300ml). Made for us in Germany.
http://www.griotsgarage.com/catalog.jsp?&SKU=20236
Miss Bling when we do the rest of your car I am going to have you sign a Non-Discosure Agreement with very strick penalties
Beware Gayle, dish soap is full of phospahtes, they rust metals fast if not 100% cleaned off... never use it to wash the car body incase it gets in a seam, but to be more relevent to this thread, I'd avoid the bay for the same reason. nick
Join the Aussie 540i LE yahoo forum
08/88 535i e34 M30+miller MAF, 'stiens, tints & teeth!