GO FISHING, use SLABSAUCE Fishing Attractant
Page 1 of 5 123 ... LastLast
Results 1 to 10 of 41

Thread: Oil pressure warning.

  1. #1
    Join Date
    Apr 2006
    Location
    Long Island, NY
    Posts
    352

    Default Oil pressure warning.

    I've been seeing this message frequently and I've been told its nothing to worry about but I thought I'd post to see what you guys think.

    the OBC throws an oil pressure warning generally at idle and with increasing frequency as the car gets hot. I've got a '94 540 converted to manual.

    Is this something I should be concerned about or do I just deal with it?

  2. #2
    Join Date
    Mar 2006
    Location
    Derbyshire, UK
    Posts
    872

    Default

    Your oil pump bolts are falling out. See http://www.strictlybmw.com/newslette.../v8oilpump.htm

    1997 535i V8
    5spd, OBC, A/C, cruise, BMW phone, factory M-Tech wheel & suspension, 18" Alpinas

  3. #3
    Join Date
    Mar 2006
    Posts
    811

    Default

    I can not imagine ever telling someone to not worry about this. Even if there is nothing wrong with your oil pressure and yu have a bug in the wiring, you will be driving a car that constantly cries wolf and you will ignore a real low oil pressure warning. Its like driving with your brake lights on all the time, you may as well not have a pressure sensor in the car at all.

    If you do have low oil pressure, then you have a real problem that must be fixed if you want to keep driving your car. Most likely it is the oil pump coming loose, or a bad sensor.

  4. #4
    Join Date
    Apr 2006
    Location
    Long Island, NY
    Posts
    352

    Default

    Ok, so I'm going to have to remove the oil pan to address this. I've seen a number of post about this common issue, but no specific procedures on how. Anyone know of a post of writeup detailing this job?

    Second, since it sounds like its a pretty big job, are there any other preventative maintinence items I should look to perform while I'm going to hoist the engine? Engine mounts looked good over the weekend when I did valve cover gaskets.

  5. #5
    Join Date
    Oct 2004
    Posts
    3,395

    Default

    It's not a hard job -- only the lower pan gets removed, not the upper. I do them regularly. Get a new gasket (metal/rubber deal), oil, and OEM filter kit. There are about 25 M6 bolts that hold the pan in place; if the car doesn't have self leveling, you don't need anything more than a 10 mm socket (and maybe a 10 mm wrench for the bolt under the bracket that holds the level sender harness connector).

    best, whit

  6. #6
    Join Date
    Mar 2006
    Location
    USA
    Posts
    1,839

    Default

    dont forget the red locktite!

    might as well get a new oil level sensor o-ring while you are at it.

  7. #7
    Join Date
    Oct 2004
    Posts
    3,395

    Default

    Loctite is virtually worthless in that environment. Any oil saturation will prevent it from creating a bond, and the substance can float around in the engine, which leads to spun bearings and things like this:




    HHHhhmm...I wonder why that one stopped running...

  8. #8
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,843

    Default

    obviously a nikasil failure... brake cleaner spray in the bolt hole with compressed air should make a good fit for loctite.

    Quote Originally Posted by lowell
    Loctite is virtually worthless in that environment. Any oil saturation will prevent it from creating a bond, and the substance can float around in the engine, which leads to spun bearings and things like this:




    HHHhhmm...I wonder why that one stopped running...
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  9. #9
    Join Date
    Mar 2005
    Location
    Long Beach, CA
    Posts
    2,563

    Default

    Quote Originally Posted by bbig119
    I've been seeing this message frequently and I've been told its nothing to worry about but I thought I'd post to see what you guys think.

    the OBC throws an oil pressure warning generally at idle and with increasing frequency as the car gets hot. I've got a '94 540 converted to manual.

    Is this something I should be concerned about or do I just deal with it?
    I occasionally get an Oil Pressure Sensor warning. Maybe twice since I've owned the car. it turned out to be nothing, but I didn't feel good about it.

    Ralph Mendoza Jr. - Long Beach, CA

  10. #10
    Join Date
    Apr 2006
    Location
    Long Island, NY
    Posts
    352

    Default

    Quote Originally Posted by lowell
    It's not a hard job -- only the lower pan gets removed, not the upper. I do them regularly. Get a new gasket (metal/rubber deal), oil, and OEM filter kit. There are about 25 M6 bolts that hold the pan in place; if the car doesn't have self leveling, you don't need anything more than a 10 mm socket (and maybe a 10 mm wrench for the bolt under the bracket that holds the level sender harness connector).

    best, whit
    What if it has self leveling?

Page 1 of 5 123 ... LastLast

Similar Threads

  1. Low oil pressure warning
    By 632 Regal in forum 8 Series BMW
    Replies: 8
    Last Post: 03-14-2023, 09:01 AM
  2. low pressure oil warning
    By ram5757 in forum 5 Series BMW
    Replies: 8
    Last Post: 02-21-2006, 02:50 PM
  3. Oil Pressure Sensor Warning
    By uscharalph in forum 5 Series BMW
    Replies: 8
    Last Post: 08-23-2005, 11:30 AM
  4. Oil pressure warning light
    By Trevor in forum 5 Series BMW
    Replies: 2
    Last Post: 01-12-2005, 12:13 AM
  5. oil pressure warning!
    By Mike in forum 5 Series BMW
    Replies: 3
    Last Post: 03-01-2004, 08:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •