GO FISHING, use SLABSAUCE Fishing Attractant
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Rust under paint -- "surface rust" or worse??

  1. #1
    Join Date
    Jul 2006
    Location
    Northern VA
    Posts
    39

    Default Rust under paint -- "surface rust" or worse??

    Rust has a way of creeping up on you, doesn't it? I was looking over my car today and discovered that three doors have rust in the rear corners, right near the drain hole. So far it looks like only the outside is affected, but the rust looks like it's underneath the paint. Does this mean that it's actually rusted from inside out, or is there still the possibility that I've got surface rust? I don't want to start grinding away at it, only to see a big gaping hole in my door. I've read some threads where some people have resorted to looking for new doors, but I'm really hoping to at least stop the rust from getting worse first.

  2. #2
    Join Date
    Dec 2003
    Location
    Eastern Tennessee USi
    Posts
    14,843

    Default

    grind it off and treat it asap before it becomes a hole.
    95 E34 530I V2.37
    ===========
    Those who make peaceful revolution impossible will make violent revolution inevitable.

    John F. Kennedy

  3. #3
    Join Date
    Feb 2006
    Location
    Norway
    Posts
    461

    Default

    Sooner is better, grind it down to see how much damage the rust have done, I use to say that at only 1/3 of the rust is visible. If i see a 3-4cm spot of rust, i usually end up with cutting away a 10-15cm piece and weld in new fresh metal.

    btw: Really fresh looking sig Jeff!
    Eurospec-12/1988-535iL-M30B35-5speed

  4. #4
    Join Date
    Jul 2006
    Location
    Northern VA
    Posts
    39

    Default

    Sigh, scary stuff. New trim is on the way, guess it's time to look into POR15 or other options.

  5. #5
    Join Date
    Sep 2005
    Location
    Goulburn Australia
    Posts
    689

    Default

    Where is VA? Is that somewhere that they put salt on the roads in winter? I just can't imagine these cars rusting. Anyway, be careful with the grinding as doors have fairly intricate pressings. As stated you MUST neutralise the rust ASAP. You must also seek to find out why it's rustings. Check your drain holes for blockages etc etc.
    Cheers

    Wingman
    '89 525i/A Exec 193000kms
    '94 Subaru Liberty AWD Wagon
    Looking for Merc 300TE
    NSW, Australia

  6. #6
    Join Date
    Feb 2006
    Location
    Norway
    Posts
    461

    Default

    All metal will rust sooner or later, o mystery there. And a car, wich have several variables of wear and tear will certanly rust. Maybe a stone chip started it, then water came in to bare metal and started doing its work underneath the paint.
    Eurospec-12/1988-535iL-M30B35-5speed

  7. #7
    Join Date
    Jul 2006
    Location
    Northern VA
    Posts
    39

    Default

    Northern VA = Northern Virginia, USA. Sorry for the confusion.

    My guess is that the rust started with the lower trim. I won't know until the trim comes off, though. I really don't have the budget to start cutting and welding, unfortunately; my goal will be to stop the rust from spreading too violently and turning my doors into Swiss cheese. If it happens slowly, I'll be alright with that for now.

  8. #8
    Join Date
    Nov 2004
    Location
    Gateshead,UK
    Posts
    926

    Default

    Do we have an agreed method of removing and treating surface rust? Do products like Jenolite etc really work? Maybe a sticky about bodywork repairs would be popular. Some e34's are 18 years old now - if they are still alive. (then there's the e28's.....)

    Just a thought!

    Shaun

  9. #9
    Join Date
    Sep 2005
    Location
    Goulburn Australia
    Posts
    689

    Default

    My E12 stated to rust along the leading edges of the lower doors. I used a rust coverter but the stuff kept coming back. I always said that the moment I saw ANY rust on the E34 I would sell it. It's like cancer man. You can treat it but it will kill you in the end. I'm sory that you've got it.
    Cheers

    Wingman
    '89 525i/A Exec 193000kms
    '94 Subaru Liberty AWD Wagon
    Looking for Merc 300TE
    NSW, Australia

  10. #10
    Join Date
    Nov 2004
    Location
    Gateshead,UK
    Posts
    926

    Default

    So does that rust converter stuff really work then?

    Shaun

Page 1 of 2 12 LastLast

Similar Threads

  1. Rust Experts... a little question about rust...
    By genphreak in forum 5 Series BMW
    Replies: 4
    Last Post: 05-25-2008, 10:53 PM
  2. anyone ever use "clearmask" paint and light protection?
    By SharkmanBMW in forum 5 Series BMW
    Replies: 1
    Last Post: 09-27-2005, 04:59 PM
  3. paint protection "clear bra" z3 question?
    By zeee in forum 3 Series BMW
    Replies: 0
    Last Post: 07-12-2005, 06:15 PM
  4. Replies: 2
    Last Post: 04-19-2004, 11:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •