oh computer guys, mine is pissing me off

[winfred]

i am trying to install a new western digital sata 2 250 gig to my onboard sata equipped asus k8vse deluxe mobo and the ****ing drive won't show up, i even unplugged my regular ide drive and booted up from the win2k (my os) disc in a attempt to format the drive (or anything) and it won't see the drive ether, the motherboard seems to see it on boot and will let me view the onboard raid crap and drive id stuff, that's the only place you would even know that another hard drive is attached, it won't show up in the bios ether (i know about the scsi naming thing too, not a option listed) and of coarse the drive utility disc doesn't see anything but my current ide boot drive, why is my **** always retarded?!

[632 Regal]

I used western digitals setup software, probably wont do a thing with sata systems and crap.

[winfred]

doesn't see the drive, i went to the web site and downloaded a fresh copy and it don't work ether, the bastard doesn't even run properly, when i click on the part where it gives you browser based instructions it takes a **** and kicks up a error box

[ryan roopnarine]

im seeing on the internets that you have to turn on the raid support on your mobo for sata to work, even though its not necessarily raid. trying to find you the no-longer existing driver to do this with.

[winfred]

i installed whatever raid stuff that was on my mobo's cd and nothing changed, i just checked add/remove hardwear again and since i changed sata ports i have a raid controller listed, going to reboot and try a few things

im seeing on the internets that you have to turn on the raid support on your mobo for sata to work, even though its not necessarily raid. trying to find you the no-longer existing driver to do this with.

[spyrot1]

You'll probably need a win2k driver for it to work. Download it and copy it a floppy, then when you install win2k press "f6" when it asks you to install to a differnet hdd location.

Better yet, upgrade to XP. It should have the drivers built in.

If the motherboard doesn't see the drive, then the drive may be bad or the motherboard needs a BIOS update to see it.

[ryan roopnarine]

here is via's sata driver
http://members.webleit.com/sonik/ind...lipVIASata.rar

install this.
move the sata to any other sata plug.
put this onto a floppy or cd. during boot, hit f6, and offer it the driver on the floppy.

tell us what happens afterward.

[winfred]

whats the correct way to burn that to a cd?

here is via's sata driver
http://members.webleit.com/sonik/ind...lipVIASata.rar

install this.
move the sata to any other sata plug.
put this onto a floppy or cd. during boot, hit f6, and offer it the driver on the floppy.

tell us what happens afterward.

[Fred Tyler]

Hi, I hope you have this sorted by now, but in case you haven't I would ask that you open control panel,
administrative tools, computer management, disk management, (often times at this stage windows will offer to install new disk) your new disk should appear in the bottem right side of that screen, clip on the disk and create new partition. once thats done you will need to format drive. You might also note that drive letters can be changed here as well , with the exemption of partition that holds o/s.
regards

[winfred]

tried it already not there, absent, missing....

Hi, I hope you have this sorted by now, but in case you haven't I would ask that you open control panel,
administrative tools, computer management, disk management, (often times at this stage windows will offer to install new disk) your new disk should appear in the bottem right side of that screen, clip on the disk and create new partition. once thats done you will need to format drive. You might also note that drive letters can be changed here as well , with the exemption of partition that holds o/s.
regards