Need input on front bumper break...

[shrike071]

So - I have this hole in my front bumper and I am wondering if anyone has any ideas on how to go about fixing it, covering it, or where I should get a replacement... Here's a pic - the hole is on the lower front left.

[Blitzkrieg Bob]

take it off clean it up, epxoy the backside to support the crack, fill cracks and scratches with glazing puddy, sand, clean again paint semi-gloss black.

put it back on the car.

[John B.]

take it off clean it up, epxoy the backside to support the crack, fill cracks and scratches with glazing puddy, sand, clean again paint semi-gloss black.

put it back on the car.

Looks like there is a good size piece missing along with the cracks. If you have it plastic welding or adhesive would work.

[shrike071]

Looks like there is a good size piece missing along with the cracks. If you have it plastic welding or adhesive would work.

Yes, there's a hole that's about 8"x4" and I have no idea where the piece went. I was thinking about getting a new bumper cover from eBay but all I see are fiberglass items, or super expensive ABS kits....