Stabiliser bar (aka sway bar) links.
Hi:
so far I have replaced the upper control arms and tie rod ends. I still get a rattle from the front end. Which bushings are still left that I can replace?
Thanks for any input .........
Stabiliser bar (aka sway bar) links.
1997 535i V8
5spd, OBC, A/C, cruise, BMW phone, factory M-Tech wheel & suspension, 18" Alpinas
Yep,Originally Posted by DaveVoorhis
got rid of my rattle
10/90 Build 525im, 630,000+km, Eibach/Sachs, Engine Rebuild
*RIP Oskar the DOG *
great .... thanks I'll order one
Why only one? Was only one side worn? They generally should be replaced in pairs, because if one is worn the other is probably not long for this world.
1997 535i V8
5spd, OBC, A/C, cruise, BMW phone, factory M-Tech wheel & suspension, 18" Alpinas
I thought it was one continous bar ... but now I see that they are a pair of sway bar links. Thanks for pointing that out to me.
thanks ... what about the center drag link ..... does it haver bushings in it?
I'm not familiar witht the term drag link, but the centre tie rod has an idler arm that has a servicable bushing that could cause a rattle - might be worth checking. Jack it up, take the wheel off and look around... you'll see it.
I've never changed one but i hear it is probably more time effective to change the arm rather than messing with the bushing for the difference in price.
we're probably talking about the same thing, different names ...
thanks again