Welp, I am of no help, but definitely subscribed.
I wanna see this.
Would it be easiest to just tap into the velocity reading from the obc? I pull that up sometimes while Im driving just because its neat to see a digital reading of my speed.
Hi E34ers.
Where there is speed signal of e34 ? I wants to attach hud(head improving display) to my e34(1995)? What is the color of the line?
Thanks.
Welp, I am of no help, but definitely subscribed.
I wanna see this.
Would it be easiest to just tap into the velocity reading from the obc? I pull that up sometimes while Im driving just because its neat to see a digital reading of my speed.
Last edited by Macv; 11-13-2007 at 08:48 AM.
InDEuroz | e34 540i/6 '94 w/ bore/stroked m62 | e30 325iS '87 | Ducati 748R '00
Okay. I'll bite.
At the DME pin #42 a blk/ wht wire is the vehicle speed sensor input. At the cluster pins 8 brn/rd & 10 brn X271 connector are the speedo signal.
This I've gotta see.
"The gas pedal wouldn't go to the floor if it weren't meant to be there"
GPS input instead?
I wedge my Gecko GPS between the dash and windshield on trips to help keep the eyes in the right place while driving.
I would like to see the write up on this. Very interesting.
Cheers,
Fin
hmmm... this i gotta see. keep us postedOriginally Posted by baopa7
HID 5000k low 3000k fogs
dynaudio seps. mc intosh amp
ACS w/yokohama advan sport tires
Race logic TractionControl
![]()
tacometer and obc output as a HUD would be very interesting. However, BMW's uses a special windshield for display. Looks like a tough problem on at least a couple levels.
Thanks,
1995 525i Auto, M50TU 2.5L, EAT chip, 1/95 build, USA, 205/65/15 tires, ASC+T, HID, lumbar, EC Mirror, BMW Alpine 5 radio with BMW-Pioneer CD Changer, abt 236k miles, Oxford Green/Parchment
I've been dreaming about this for sometime now as well.
I'd definitely do the mod if it would display anything the obc would.
X).... That'd be sweet.
InDEuroz | e34 540i/6 '94 w/ bore/stroked m62 | e30 325iS '87 | Ducati 748R '00
I believe there are films that can be placed on the windshield that are reflective and transparent. I got the idea of using a pda as a HUD a while ago but gave up due to complexity.
Originally Posted by Russell
same here. wanted to do that mod since I saw one in an m5 but just thinking of the complexity and how much it'll cost hurts my brain just thinkin about itOriginally Posted by Macv
![]()
HID 5000k low 3000k fogs
dynaudio seps. mc intosh amp
ACS w/yokohama advan sport tires
Race logic TractionControl
![]()