GO FISHING, use SLABSAUCE Fishing Attractant
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Stiiif shiiifter

  1. #1
    Join Date
    Apr 2006
    Location
    Chicago, Il. U.S.A.
    Posts
    4,243

    Default Stiiif shiiifter

    My '89 has just been pressed into service for the upcoming Chicago winter.
    The shifter is very stiff. The man I bought the car from attributed this to Redline oil. Well, I changed out the oil(looked like ATF) for fresh ATF as stated on the gearbox with no change.
    The trans shifts fine but the lever feels like it's in wet concrete. Front to back, side to side, stiff as hell.
    I've seen plenty of worn out bushings causing the lever to flop all over but never this.
    Any ideas gentlemen? When it gets really cold this thing is gonna be a bear.
    By the way, did I mention how I love the old M30s? What a great engine.
    "The gas pedal wouldn't go to the floor if it weren't meant to be there"

  2. #2
    Join Date
    Sep 2007
    Location
    Hamilton Ontario
    Posts
    77

    Default

    Mine does the same, i have a SSK kit on it, but its most likely due to cold weather.

  3. #3
    Join Date
    Apr 2006
    Location
    Chicago, Il. U.S.A.
    Posts
    4,243

    Default

    I thought of perhaps some modification, but this would be couterproductive for quick gearchanges and the throws are normal.
    As far as yours goes,Eng Phys, if you have gear oil in cold weather it'll be stiff until it warms.
    I'm wondering if maybe some band-aid was applied to compensate for sloppy bushings.
    I'm too lazy to crawl underneath it right now so am hoping someone here has heard of this.
    "The gas pedal wouldn't go to the floor if it weren't meant to be there"

  4. #4
    Join Date
    Feb 2007
    Location
    New Forest, ,UK,
    Posts
    794

    Default

    Try cheating,push a straw/ tube down by the lever to lubricate the plastic bush pivot,put enough down and it will get to the pivot bush on the bottom of the lever. Worked for me til I could strip it all down, now cannot get the recon bush kit in Uk,any links in US?

  5. #5
    Join Date
    Apr 2006
    Location
    Chicago, Il. U.S.A.
    Posts
    4,243

    Default

    Was yours REALLY tight?
    "The gas pedal wouldn't go to the floor if it weren't meant to be there"

  6. #6
    Join Date
    Dec 2006
    Location
    Long Island
    Posts
    319

    Default

    how tight?
    if you pushed the lever to the side, would it spring back to center?

    Mine is tight due to the cold but only going in and out of the gears. side to side in neutral the lever moves easily. Once the trans is warmed up, it shifts well, but i am planning to change the fluid anyway.

  7. #7
    Join Date
    Apr 2006
    Location
    Chicago, Il. U.S.A.
    Posts
    4,243

    Default

    Rally, It returns normally to the center gate.
    Barney, Tried the lube, no love.
    "The gas pedal wouldn't go to the floor if it weren't meant to be there"

  8. #8
    Join Date
    Jul 2006
    Location
    Houston, Tx
    Posts
    592

    Default

    I don't have the manual but if I recall there's several pivot points on the shift linkage going to the forks. Sounds like if you could get the boot off the shifter for the top ones and crawl underneath for the bottom ones that a reall liberal spray of silicone lube would do the trick... ? I had an old Jeep 4 speed that was so stiff in cold weather that sometimes when 4-wheeling I'd have push the shifter into granny gear with my foot (attribute to 38 year old trans, with 38 years of wear and tear and gunk and funk!)


    "Scarlet" `97 540/6 with sleepy mods.
    "Box Car" '87 535isA - Old School Charm, new school Flair

  9. #9
    Join Date
    Jan 2004
    Location
    Albuquerque, NM
    Posts
    953

    Default

    I'm sorry guys but a thread with a title like this has been lingering too long to not get an OT reply. 5.8 Mb, right-click, save-as:

    http://www.nmia.com/~dgnrg/Skeleton.wmv


  10. #10
    Join Date
    Apr 2006
    Location
    Chicago, Il. U.S.A.
    Posts
    4,243

    Default

    I ain't gonna do it. Last time I tried an OT link Big Kris put up it was some gay porn.
    Tell me it's not wierd.
    "The gas pedal wouldn't go to the floor if it weren't meant to be there"

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •