Pitman.....Dog Bone....Wishbone....I dont even know anymore!!!! hahahaha

[BMW4LIFE]

Well anyways...this part has like a million names for it but the fact of the matter is that my if JACKED!

haha

the bushings are all shot so I went to go purchase them and the cheapest i found was ~68 each.

My question is..........

Would I be able to buy just the bushings for it and get it pressed instead of the whole arm? The arms are in great shape!

[bad_manners_god]

Well anyways...this part has like a million names for it but the fact of the matter is that my if JACKED!

haha

the bushings are all shot so I went to go purchase them and the cheapest i found was ~68 each.

My question is..........

Would I be able to buy just the bushings for it and get it pressed instead of the whole arm? The arms are in great shape!

Shogun linked me here before for my rear brake shoes. I guess I can return the favor:

https://www.autohausaz.com/search/pr...ount%20Bushing

[BigKriss]

what part are you talking about, show us a reloem.com link

[632 Regal]

rear or front part?

[gale]

did someone say dogbone? . . .

http://www.youtube.com/watch?v=_GEO6Ynwqmc

[BMW4LIFE]

what part are you talking about, show us a reloem.com link

http://www.realoem.com/bmw/showparts...23&hg=33&fg=30

#6

Rear Pitman "bogbone"

Thanks!

[BMW4LIFE]

Shogun linked me here before for my rear brake shoes. I guess I can return the favor:

https://www.autohausaz.com/search/pr...ount%20Bushing

i was looking at that one too but i have never heard of that brand...as far i know it could crap out on me in a month =/

[bad_manners_god]

i was looking at that one too but i have never heard of that brand...as far i know it could crap out on me in a month =/

Seems like a good brand, quality looks good in picture.

[BigKriss]

okay, you leave the car on the ground. no need to jack it up, just undo the old bolt remove the old dogbone and replace with the new items. you can't replace anything "old" on the dogbone, you have to replace the whole item.

http://www.realoem.com/bmw/showparts...23&hg=33&fg=30

#6

Rear Pitman "bogbone"

Thanks!

[Vanguard]

I have a set of them, I'm planning to install this weekend. Part quality seems good. I have the complete front suspension from Karlyn and it's holding up ok after 1 year on the car. I do have some cracked boots the driver side tre's though.