Changed my chain tensioner, pita spot on the M60 and dummy fumbly me dropped it out of the thread in the tightening process, and the new spring disappeared totally under the engine.. Sigh! (gave myself 3 good smacks on the head with the wrench after looking for the spring for 2 hours ) Had to reuse the old spring in the new tensionerhousing.. At least nothing else broke and it runs with less rattle so far, would´ve been better with the new one tho! Of course I chose to do this in total darkness with a flashlight in one hand, just to make things harder..
So semi new chain tensioner and 3 sore bumbs on the head!
CD43,Style 21s,K&N Insert,White blinkers,LED 3rd brakelight,HIDs,front Monroe sportsshocks/Weitec 35 springs,540 Calipers, Zimmermann Discs and Textar pads.
Being stubborn payed off, I found the internal chain tensioner spring today, lying about ˝ a mile from where it dropped down under the car.. Speak about stubbornness or perhaps luck even Now its in and its about twice the length of the old one, no wonder I had chain noise! In fact the chains are so quiet now that I can hear that my oilpump chain needs a lookover a.s.a.p..
Merry Xmas everyone!
CD43,Style 21s,K&N Insert,White blinkers,LED 3rd brakelight,HIDs,front Monroe sportsshocks/Weitec 35 springs,540 Calipers, Zimmermann Discs and Textar pads.
Indeed!
CD43,Style 21s,K&N Insert,White blinkers,LED 3rd brakelight,HIDs,front Monroe sportsshocks/Weitec 35 springs,540 Calipers, Zimmermann Discs and Textar pads.
What was the part number for the spring? I removed my intake manifold to replace the pcv gasket and broke a spring. I have not been successful in locating the replaced part or part number.
CD43,Style 21s,K&N Insert,White blinkers,LED 3rd brakelight,HIDs,front Monroe sportsshocks/Weitec 35 springs,540 Calipers, Zimmermann Discs and Textar pads.