Reply With QuoteAll of mine have always stayed on the chosen function until I either turn off the car or press a button for another function.
OBC behavior
Could someone please confirm one way or another if the E34 On Board Computer display normally returns to its default position -- hours and minutes -- about 3-5 seconds after another function such as range or temperature has been selected, or whether it remains displaying the selected function until another function is selected, or the ignition is turned off? My current E34 does not revert to the default setting by itself until the ignition is switched on again, but I seem to recollect previously owned E34s did in fact return to hours and minutes after a few seconds -- or did I just dream it?
1995 E34 540i Manual Limited Edition -- #50 out of 70 Australian RHD. Have owned 3 x E34 535i 5 speeds and E36 328i 5 speed (in the US), and a 1982 E28 528i, RHD Australian Euro-type 5 Speed.
Big, Big Time Poster
All of mine have always stayed on the chosen function until I either turn off the car or press a button for another function.
Super Moderator
rph: It looks like you had a dream.
Also see owners manual.
Grand Master
mine always stays on the selected function
Okay, thanks. Dreaming it was. I couldn't see anything in the owner's manual to change the way it behaves either.
1995 E34 540i Manual Limited Edition -- #50 out of 70 Australian RHD. Have owned 3 x E34 535i 5 speeds and E36 328i 5 speed (in the US), and a 1982 E28 528i, RHD Australian Euro-type 5 Speed.
Sorry, would have said you were dreaming. (E32 and E34 seem to be the same FYI)
Posting Permissions